Ductile iron fittings
Ductile iron fittings with mechanical joint
Ductile iron elbows, tees, reducers and sleeves with mechanical joint (MJ socket) connection for cast iron pipe. A dismountable, watertight connection able to absorb small angular deflections in water supply networks and civil works.
- 55references
- 80 – 800 mmsize range
The mechanical-joint fitting family is designed to configure ductile iron pipe networks without welding or flanges. Each item incorporates a socket with gland and elastomer gasket that is compressed by bolts, creating a watertight, dismountable joint that tolerates the misalignment typical of site conditions.
The range covers 11° and 22° elbows, all-socket tees, tees with flanged branch, socket-socket reducers and sleeves, in diameters from DN 80 to DN 800. All items are made of ductile iron and supplied with an epoxy coating for a long service life in buried installations.
It is the usual solution for water utilities and hydraulic works contractors for branches, changes of direction and transitions in existing cast iron networks.
- Material
- ductile iron.
- Joint type
- socket with mechanical joint (gland + elastomer gasket + bolts).
- Coating
- epoxy paint inside and out.
- Available items
- 11° and 22° elbows, all-socket tees, tees with flanged branch, reducers and sleeves.
- Compatible pipe
- ductile iron and grey cast iron.
- Working pressure
- PN 10/16 (enquire by diameter).
- Mechanical-joint socket elbowsDN 100 and DN 150 (11° and 22°).
- All-socket teesDN 100 to DN 200.
- Socket tees with flanged branchDN 80 to DN 800, with branches from DN 60 to DN 400.
- Socket-socket reducersDN 100/80 to DN 300/250.
- Socket sleevesDN 80 to DN 800.
- Ductile iron water supply networks.
- Branches and service connections on existing pipelines.
- Renewal and repair of network sections without welding.
- Pumping stations and large-diameter collectors.
References
Mechanical-joint fittings
Subfamily created from ERP code GA33 (55 references). No PDF technical data sheet or own photograph: the category image is shown.
DN
Angle
No references match the filters.
From the blog: guides on this family
More news
12 May 2026Digitalisation of irrigation communities: which hydraulic parts a remote-controlled control head needsThe PERTE for digitalisation of the water cycle has funded hundreds of remote-control projects in irrigated areas. Sensors and solenoid valves are the visible part; underneath, you need hydraulics that do not fail.
21 January 2026Reclaimed and desalinated water in irrigation: what it demands of valves and fittingsSpain reuses more water than any other European country, and the south-east irrigates more and more with desalinated water. These are different waters: more salts, more chlorine, more aggressive to metal. This is how we manufacture for them.
9 December 2025Dismantling joints: what they are for and how to size them in a valve chamberIt is the part nobody sees until a valve has to be replaced. What a dismantling joint is, where it goes, how the length is chosen and why we manufacture it in stainless steel.
Other ductile iron fittings families
View the category
GA02-1Socket fittings for PVCComplete range of GGG-50 ductile iron fittings for PVC pipes. Includes elbows, tees, reducers and flanges manufactured to the strict UNE-EN 545 sta…
GA02-2Flanged fittingsComplete range of flanged fittings for building highly reliable networks. Includes elbows, tees, crosses and dismantling joints, made of GGG-50 duc…